Z-Wave Aeotec 7 Pro - Parameter 9: BASIC command value sent to 2 nd Association Group on Off event; Parameter 10: Time Delay of On command frame; Parameter 11: Time Delay of Off command frame; Parameter 12: Delay of Tamper Alarm Cancellation

Setting Description
0
-
99
Value
255
Value
Parameter 9: BASIC command value sent to 2nd Association Group on Off event
This is the BASIC command value sent in case of Off event.
Size: 1 Byte, Default Value: 0
Setting
Description
0
-
99
Value
255
Value
Parameter 10: Time Delay of On command frame
On command is sent after a delay defined in this parameter.
Size: 2 Byte, Default Value: 0
Setting
Description
0
-
32400
seconds
Parameter 11: Time Delay of Off command frame
Off command is sent after a delay defined in this parameter.
Size: 2 Byte, Default Value: 0
Setting
Description
0
-
32400
seconds
Parameter 12: Delay of Tamper Alarm Cancellation
Time a tamper alarm is delayed.
Size: 2 Byte, Default Value: 0
Setting
Description
0
-
32400
seconds
Parameter 13: Reporting Tamper Alarm Cancellation
This parameter defines if the alarm cancellation event is reported.
Size: 1 Byte, Default Value: 1
Setting
Description
0
Do not send Report
1
Send Report
Parameter 14: Central Scene Event Functionality