Zagg messenger folio 2 - Inserting and Removing Your Device

2
INSERTING/REMOVING YOUR DEVICE
1
2
fn
ctrl
Open the Messenger Folio 2 and lay it flat on your work surface.
With your device positioned in landscape mode, slide the
top corners of your device into the top two corner clips of the
Messenger Folio 2. Then snap the bottom of your device into the
bottom centered clip on the Messenger Folio 2. Check the corners
of your device to ensure it’s snugly in place.
To remove, simply lift the device out of the lower clip and slide your device out.