25
2. IDENTIFICATION
2.1 Nameplate
Each unit Zanotti Transblock is identified by a sticker. On the plate they are given the plant model, serial number
and other information.
For any problem, refer to the information on the data plate and note the plant model and serial number before
calling your service personnel.
Technical support staff needs this information to ensure a more efficient service.
The plate is complete visible by removing the left side (according to the direction of travel of the vehicle) of the
condensing unit, on the closure panel of the electrical panel or on the frame and on the plastic drip tray of the
evaporator inside the cell; The serial number is also listed on the side panel of a metal plate for immediate
identification.
To Next Page
Loading...
