Filling the rinse aid dispenser
1
2
max
M
A
X
1
2
3
4
+
3
4
M
A
X
1
2
3
4
+
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
Daily use
1. Open the water tap.
2. Turn the programme knob until the pro-
gramme marker is aligned with a pro-
gramme on the control panel. Make sure
that the appliance is in setting mode, refer
to ’SETTING AND STARTING A PRO-
GRAMME’.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for
the type of load and the degree of soil.
Using the detergent
1 2
A
3
Put the detergent or
the tablet in compart-
ment (A).
A
7
www.zanussi.com
To Next Page
Loading...
