What to do if my Zanussi Dishwasher doesn't fill with water?
If your Zanussi Dishwasher isn't filling with water, several things could be the issue. First, ensure that the water tap is completely open. Check that the water supply pressure isn't too low by contacting your local water authority. Also, make sure the water tap isn't clogged. Inspect the filter in the inlet hose for any clogs and ensure that the inlet hose isn't kinked or bent.
What to do if the Zanussi ZDS12002WA program does not start?
If the program on your Zanussi Dishwasher isn't starting, make sure the appliance door is fully closed. Press the start button. If the delay start function is enabled, either cancel the setting or wait for the countdown to finish. Also, the appliance may be in the process of recharging the resin inside the water softener, which can take approximately 5 minutes.
Why is my Zanussi ZDS12002WA Dishwasher not draining water?
If your Zanussi Dishwasher isn't draining water, check to make sure that the sink spigot is not clogged. Also, ensure that the drain hose has no kinks or bends.
How to fix a leak from the Zanussi ZDS12002WA Dishwasher door?
A small leak from the door of your Zanussi Dishwasher indicates that the appliance is not levelled. Try to loosen or tighten the adjustable feet. If that doesn't work, the appliance door may not be centered on the tub; adjust the rear foot.
Why does the Zanussi ZDS12002WA program last too long?
If the program on your Zanussi Dishwasher is lasting too long, check if the delayed start option is set. If it is, cancel the delay setting or wait for the countdown to finish.
Why does my Zanussi ZDS12002WA Dishwasher trip the circuit-breaker?
Your Zanussi Dishwasher might be tripping the circuit-breaker because the amperage is insufficient to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off another appliance. Alternatively, there could be an internal electrical fault with the appliance.
How to stop rattling sounds in my Zanussi ZDS12002WA Dishwasher?
Rattling or knocking sounds from inside your Zanussi Dishwasher usually indicate that the tableware is not properly arranged in the baskets. Make sure that the spray arms can rotate freely.
Why is the Zanussi ZDS12002WA Dishwasher door difficult to close?
If the door of your Zanussi Dishwasher is difficult to close, it could be that the appliance is not levelled. Loosen or tighten the adjustable feet. Also, check if any parts of the tableware are protruding from the baskets.
Why does the Zanussi ZDS12002WA Dishwasher stop and start during operation?
It is normal for the Zanussi Dishwasher to stop and start during operation. This provides optimal cleaning results and energy savings.
What to do if the anti-flood device is on in my Zanussi ZDS12002WA Dishwasher?
Close the water tap.
General| Brand | Zanussi |
|---|---|
| Model | ZDS12002WA |
| Category | Dishwasher |
| Language | English |
To Next Page
