Why are there residues of detergent in Zanussi ZDSN653X2?
If you find residues of detergent in the dispenser of your Zanussi Dishwasher at the end of the program, ensure that the spray arms are not blocked or clogged. Also, check that items in the baskets do not prevent the detergent dispenser lid from opening.
What to do if Zanussi ZDSN653X2 is not filling with water and shows i10 or i11?
If your Zanussi Dishwasher displays i10 or i11 and isn't filling with water, make sure the water tap is fully open and that the water supply pressure isn't too low. Check that the water tap and the filter in the inlet hose aren't clogged, and ensure the inlet hose isn't kinked or bent.
What to do if Zanussi ZDSN653X2 Dishwasher programme does not start?
If your Zanussi Dishwasher programme doesn't start, ensure the appliance door is closed properly and press the Start button. If a delay start is set, either cancel it or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which can take approximately 5 minutes.
How to fix Zanussi Dishwasher when it does not fill with water and shows i10 or i11?
If your Zanussi Dishwasher isn't filling with water and the display shows i10 or i11, check the following: * Ensure the water tap is fully open. * Verify that the water supply pressure isn't too low. * Confirm the water tap isn't clogged. * Inspect the inlet hose filter for clogs. * Ensure the inlet hose isn't kinked or bent.
What to do if my Zanussi Dishwasher does not drain water and shows i20?
If your Zanussi Dishwasher isn't draining water and the display shows i20, check these items: * Make sure the sink spigot is not clogged. * Ensure the interior filter system is not clogged. * Verify that the drain hose has no kinks or bends.
How to improve drying results in Zanussi Dishwasher?
To resolve poor drying results with your Zanussi Dishwasher: If tableware was left for too long inside the closed appliance, activate the AirDry function to automatically open the door and improve drying. Ensure the rinse aid dispenser is full, or increase the dosage. Always use rinse aid, even with multi-tablets. Note that plastic items may require towel drying. Also, check that the selected program includes a drying phase.
How to prevent dull or chipped tableware in my Zanussi Dishwasher?
If you notice dull, discoloured, or chipped tableware from your Zanussi Dishwasher: * Ensure that only dishwasher-safe items are washed in the appliance. * Load and unload the basket carefully. * Place delicate items in the upper basket. * Activate the GlassCare option for special care.
Why does my Zanussi Dishwasher trip the circuit breaker?
If your Zanussi Dishwasher trips the circuit breaker, it could be due to a couple of reasons. First, the amperage might be insufficient to handle all appliances running at the same time; in this case, check the socket amperage and meter capacity, or turn off another appliance. Alternatively, there may be an internal electrical fault, in which case you should contact an Authorised Service Centre.
How to improve poor washing results with my Zanussi ZDSN653X2 Dishwasher?
If you're experiencing poor washing results with your Zanussi Dishwasher, consider these suggestions: * Consult the "Daily use", "Hints and tips" sections and the basket loading leaflet. * Try using a more intensive washing programme. * Activate the ExtraPower option to enhance washing results. * Clean the spray arm jets and filter.
Why does my Zanussi ZDSN653X2 have poor drying results?
If you notice poor drying results with your Zanussi Dishwasher, consider the following: * If tableware has been inside the closed appliance for too long, activate the AirDry function. * If there is no rinse aid or not enough rinse aid, fill the rinse aid dispenser or increase the dosage. * The quality of the rinse aid might be the problem. * Always use rinse aid, even when using multi-tablets. * Plastic items may require towel drying. * The selected programme may not have a drying phase.
General| Brand | Zanussi |
|---|---|
| Model | ZDSN653X2 |
| Category | Dishwasher |
| Language | English |
Focuses on safety precautions for children and vulnerable individuals using the appliance.
Covers general safety guidelines for the appliance's use, environment, and household domestic use.
Provides essential safety guidelines and warnings related to appliance installation by qualified personnel.
Details safety precautions and warnings for proper electrical connection to prevent fire and shock.
Safety and operational guidelines for connecting the appliance to the water supply, including leak prevention.
Details available wash programmes, their load capacity, soil degree, programme phases, and available options.
Option to protect delicate items by reducing temperature changes during washing, keeping it at 45 °C.
Option to improve washing results by increasing the wash temperature and duration of selected programmes.
Explains how to set programmes and enter user mode for custom settings like rinse aid notification and AirDry.
Details the water softener, its function to remove minerals, and adjustment based on water hardness.
Step-by-step guide on how to adjust the water softener level according to local water hardness.
Instructions to disable the notification for refilling the rinse aid dispenser, especially if using multi-tablets.
Guide on how to turn off the automatic door opening feature during drying to prevent potential danger.
To Next Page
