Why does my Zanussi ZDSN653X2 stop and start frequently?
If your Zanussi Dishwasher stops and starts more times during operation, this is normal. It provides optimal cleaning results and energy savings.
How to prevent stains and dry water drops on dishes from Zanussi Dishwasher?
If you find stains and dry water drops on glasses and dishes from your Zanussi Dishwasher: * The released quantity of rinse aid may not be sufficient, so adjust the rinse aid dosage to a higher level. * The quality of the rinse aid might be the cause.
Why are there residues of detergent in the Zanussi ZDSN653X2 Dishwasher dispenser?
If there are residues of detergent in the dispenser of your Zanussi Dishwasher at the end of the programme: * The detergent tablet may have been stuck in the dispenser. * Water may not be able to wash away the detergent because the spray arms are blocked or clogged. * Items in the baskets may be preventing the detergent dispenser lid from opening.
What to do if Zanussi ZDSN653X2 Dishwasher doesn't drain and shows i20?
To address the issue of your Zanussi Dishwasher not draining water (displaying i20), ensure that the sink spigot and the interior filter system are not clogged. Also, check the drain hose for any kinks or bends.
How to improve poor washing results with my Zanussi ZDSN653X2 Dishwasher?
If you're experiencing poor washing results with your Zanussi Dishwasher, consider these suggestions: * Consult the "Daily use", "Hints and tips" sections and the basket loading leaflet. * Try using a more intensive washing programme. * Activate the ExtraPower option to enhance washing results. * Clean the spray arm jets and filter.
Why does my Zanussi Dishwasher programme not start?
If your Zanussi Dishwasher isn't starting, make sure of the following: * The appliance door is completely closed. * You have pressed the start button. * If the delay start is set, either cancel it or wait for the countdown to finish. * The appliance may be recharging the resin inside the water softener (this takes about 5 minutes).
Why does my Zanussi ZDSN653X2 have poor drying results?
If you notice poor drying results with your Zanussi Dishwasher, consider the following: * If tableware has been inside the closed appliance for too long, activate the AirDry function. * If there is no rinse aid or not enough rinse aid, fill the rinse aid dispenser or increase the dosage. * The quality of the rinse aid might be the problem. * Always use rinse aid, even when using multi-tablets. * Plastic items may require towel drying. * The selected programme may not have a drying phase.
How to remove limescale deposits from Zanussi Dishwasher?
If you see limescale deposits on the tableware, tub, or inside the door of your Zanussi Dishwasher, it may indicate a low salt level. Also, ensure the salt container cap is not loose. If your tap water is hard, consult the section on "The water softener". Use salt and set regeneration of the water softener even when using multi-functional tablets. Start a program with a descaler designed for dishwashers, and clean the appliance with suitable detergents if the deposits persist. You might also try a different detergent or contact the detergent manufacturer.
How to prevent water spots on Zanussi ZDSN653X2 Dishwasher?
If you find stains and dry water drops on glasses and dishes after using your Zanussi Dishwasher, it could be due to insufficient rinse aid. Adjust the rinse aid dosage to a higher level.
How to remove streaks from Zanussi ZDSN653X2?
If you notice whitish streaks or bluish layers on glasses and dishes from your Zanussi Dishwasher, it's likely that too much rinse aid is being released. Adjust the rinse aid dosage to a lower level.
General| Brand | Zanussi |
|---|---|
| Model | ZDSN653X2 |
| Category | Dishwasher |
| Language | English |
Focuses on safety precautions for children and vulnerable individuals using the appliance.
Covers general safety guidelines for the appliance's use, environment, and household domestic use.
Provides essential safety guidelines and warnings related to appliance installation by qualified personnel.
Details safety precautions and warnings for proper electrical connection to prevent fire and shock.
Safety and operational guidelines for connecting the appliance to the water supply, including leak prevention.
Details available wash programmes, their load capacity, soil degree, programme phases, and available options.
Option to protect delicate items by reducing temperature changes during washing, keeping it at 45 °C.
Option to improve washing results by increasing the wash temperature and duration of selected programmes.
Explains how to set programmes and enter user mode for custom settings like rinse aid notification and AirDry.
Details the water softener, its function to remove minerals, and adjustment based on water hardness.
Step-by-step guide on how to adjust the water softener level according to local water hardness.
Instructions to disable the notification for refilling the rinse aid dispenser, especially if using multi-tablets.
Guide on how to turn off the automatic door opening feature during drying to prevent potential danger.
To Next Page
