Why does my Zanussi ZDSN151X1 trip the circuit-breaker?
Your Zanussi Dishwasher might trip the circuit-breaker because the amperage is insufficient to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the appliances in use.
Why are there limescale deposits on my Zanussi Dishwasher?
Limescale deposits on your Zanussi Dishwasher can be due to several reasons: the level of salt is low (check the refill indicator), the cap of the salt container is loose, your tap water is hard, or you are not using salt and setting regeneration of the water softener even when using multi-functional tabs. If limescale deposits persist, clean the appliance with suitable detergents or try a different detergent.
What to do if the anti-flood device is on in my Zanussi ZDSN151X1?
If the anti-flood device is activated on your Zanussi Dishwasher, close the water tap immediately. Make sure that the appliance is correctly installed and the baskets are loaded as instructed in the user manual.
Why are my dishes wet after Zanussi ZDSN151X1 cycle?
If the dishes are wet after a Zanussi Dishwasher cycle, activate the AirDry function for best drying results. Other potential causes include: the programme not having a drying phase or having one with a low temperature, an empty rinse aid dispenser, the quality of the rinse aid, or the quality of the multi-tablets. Consider trying a different brand of multi-tablets or activating the rinse aid dispenser and using rinse aid and multi-tablets together.
Why my Zanussi ZDSN151X1 is not turning on?
If you cannot activate your Zanussi Dishwasher, ensure that the mains plug is properly connected to the mains socket and that there is no damaged fuse in the fuse box.
What to do if my Zanussi ZDSN151X1 doesn't fill with water?
If your Zanussi Dishwasher isn't filling with water, make sure the water tap is fully open and that the water supply pressure isn't too low. Also, check that the water tap and the filter in the inlet hose are not clogged. Finally, ensure the inlet hose has no kinks or bends.
What to do if my Zanussi ZDSN151X1 Dishwasher doesn't drain the water?
If your Zanussi Dishwasher isn't draining water, check these items: * Make sure the sink spigot is not clogged. * Make sure the interior filter system is not clogged. * Ensure the drain hose has no kinks or bends.
General| Type | Freestanding |
|---|---|
| Number of Place Settings | 13 |
| Energy Efficiency Class | E |
| Noise Level | 49 dB |
| Programs | 6 |
| Appliance placement | Freestanding |
| Product size | Full-size |
| Width | 60 cm |
| Delay Start | Yes |
| Half Load Option | No |
| Washing programs | Eco, Intensive, Normal |
| Height | 85 cm |
To Next Page
