Need help?Do you have a question about the zapco ST-2X SQ and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| THD @ Rated Power | <0.05% |
| Signal-to-Noise Ratio | >90dB |
| Damping Factor | >200 |
| Frequency Response | 10Hz-30kHz |
| Crossover Range | 50Hz-5kHz |
| Crossover Slope | 12dB/octave |
| Crossover | High Pass/Low Pass/Full Range |
| Input Sensitivity | 200mV-5V |
To Next Page
