zapco STUDIO 50 - Specifications

Specifications
Output Power
25 watts/ch @ 4Ω, 20Hz-20kHz
50 watts/ch @ 2Ω, 20Hz-20kHz
T.H.D. + Noise
<.04%, 20Hz-20kHz @ 25 watts/ch, 4Ω
<.05%, 20Hz-20kHz @ 50 watts/ch, 2Ω
S/N Ratio >100dB
Dynamic Headroom 1.5dB @ 2 ohm load
Separation >65dB
Damping Factor >100 @ 4 ohms
Input Type Fully isolated RCA
Input Sensitivity 230mV - 2.3 Volts, variable
Maximum Input Level 2.3 Volts R.M.S.
Input Impedance 47K ohms
Power Requirements 15 Amperes max. @ 2 ohms
Fuse Rating Internal, 20 Amperes
Minimum Load 2 ohms stereo - 4 ohms mono
Idle Current .72 Amperes
Dimensions 8.5”L x 5-7/8”W x 2-1/4”H
8