Zavoli Bora - Main Steps for Unit Setup; ECU Initialization

Technical Instructions
installation Guide
System New Bora
MT-IS-GAI-NWB.01-E
del 01/10/2013
Pag. 20 di 26
4.1 Main steps for setting up the unit
4.2 Initialization Ecu
After selecting the check box corresponding to the type of fuel LPG or CNG, simply press the
button initializes. Automatically be sent to the control unit and a standard mapping software that
will allow you to calibrate the car. At the end of the programming will pass to the next step.
Fig. 4.2-1