Technical Instructions
installation Guide
System New Bora
MT-IS-GAI-NWB.01-E
del 01/10/2013
Pag. 22 di 26
4.5 Save calibration
Attention to a very important first save before running the self-mapping, otherwise it is impossible
to perform the seve calibration.
Fig. 4.5-1
4.6 Self-Calibration
Fig. 4.6-1
Before starting self-mapping procedure for the Bora and Bora Light systems, the connection to the
MAP sensor will be requested.
Self-mapping consists in acquiring the values of the various parameters when idling on petrol and in
their processing on the basis of the supplied data (engine displacement, number of cylinders,
To Next Page
Loading...