Zebex Z-9000 User Manual

The Steps for updating the firmware of Z-9000
1. Power off the Z-9000 unit.
2. Press 8 and the Power key at the same time to enter Program Manager.
3. Use the up/down arrow keys to select “1. Download “ and press Enter (blue key)
to enter the Download screen.

Zebex Z-9000 Specifications

General

Light Source	650 nm visible laser diode
Power Supply	5VDC ± 5%
Type	Laser
Interface	USB, RS-232, Keyboard wedge
Reading Speed	200 scans per second
Beeper Operation	Programmable
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity	5% to 95% (non-condensing)
Drop Test	1.5 m
ESD Protection	±15 kV air discharge, ±8 kV contact discharge
Barcodes Supported	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar