Zebex Z-3100 User Manual

Z-3100
Middle-Range Handheld CCD Scanner
Service Guide
Revision History
Changes to the original manual are listed below:
Version Date Description of Version
1.1 Aug. 19, 2010 Initial release
1.2 Dec. 16, 2010 Corrected P/N for top and bottom case, white
FCC cable, and scan engine.
1.3 July. 05, 2012 Updated scanner covers
1.4 Jan. 07, 2013 Updated case parts and added double sided
tape to parts
1.5 Feb. 04, 2015 Updated covers, engine board

Zebex Z-3100 Specifications

General

Scan Technology	Laser
Light Source	650 nm visible laser diode
Scan Rate	330 scans per second
Storage Temperature	-20°C to 60°C
Humidity	5% to 95% (non-condensing)
Input Voltage	5 VDC ±10%
Resolution	0.10 mm (4 mil) @ PCS=90%
Interface	RS-232, USB, Keyboard Wedge
Operating Temperature	0°C to 45°C
Print Contrast	Minimum 30%
Beeper Operation	Programmable tone & volume
Operating Current	100 mA
Drop Test	1.5 m
Type	Handheld
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar
Drop Specification	1.5 m drop to concrete
Power Consumption	0.5W (typical)

Summary

Preface

Important Notice

General warranty, liability, and usage disclaimers for the manual content.

Radio Notice

Compliance information regarding radio frequency energy and potential interference.

Radio and Television Interference

Guidance on mitigating interference with radio and television reception.

For CE-Countries

Notes on CE conformance and power supply unit requirements for CE-marked products.

Scanner Parts

New Scanner Parts

Take Apart

Before You Start

General preparation steps before disassembling the scanner.

Important Instructions

Key instructions to follow during the disassembly process, including warnings.

Tools to Prepare

List of necessary tools required for performing the disassembly procedure.