Zebra DS9208 - User Manual

To Next Page

http://www.zebra.com/ds9208

DS9208

POST IN WORK AREAPOST IN WORK AREA

Quick Start Guide

WALL MOUNTING TABLE TOP MOUNTING

See Product Reference Guide for detailed information

HOST INTERFACES

NOTE: Cables may vary depending on configuration

TROUBLESHOOTING

No power to scanner Incorrect interface cable used

Scan appropriate host parameter bar codes Ensure all cable connections are secure

Interface/power cables are loose

Scanner not working

Check system power;

ensure power supply, if

required, is connected

Ensure that correct

interface cable is used

Ensure all cable

connections are secure

Ensure scanner is programmed

to read type of bar code being

scanned

EnsEnsure bar code is not defaced;

try scanning test bar code of same

bar code typeure bar code is not

defaced; try scanning test bar code

of same bar code type

Move scanner closer to or further

from bar code

Bar code unreadable Distance between scanner

and bar code incorrect

Scanner not programmed

for bar code type

Scanner not decoding bar code

Scanner not programmed for correct host interface Interface cable is loose

Scanner decoding bar code, but data not transmitting to host

Scanner not programmed for correct host interface

Scan appropriate host parameter bar codes

Scanned data incorrectly displayed on host

DS9208 PROGRAMMING BAR CODES

1 LED Indicators

2 Scan Window

3 Scan Trigger

4 Beeper

SET DEFAULTS

HID KEYBOARD EMULATION

IBM HAND-HELD USB

ICL RS-232

NIXDORF RS-232 MODE A

NIXDORF RS-232 MODE B

FUJITSU RS-232

OPOS/JPOS

Keyboard Wedge

IBM PC/AT and IBM PC COMPATIBLE

STANDARD RS-232

RS-232 Host Types

Enter Key (Carriage Return/Line Feed)

Set Defaults

USB Host Types

Keyboard Wedge Host Types

Scan ONE of the following country types

NORTH AMERICAN

FRENCH

FRENCH CANADIAN

SWEDISH

JAPANESE

ITALIAN

SPANISH

UK ENGLISH

GERMAN

SNAPI WITH IMAGING

SNAPI WITHOUT IMAGING

Power supply optional

PORT 5B

PORT 9B

IBM 46XX Host Types

PORT 17

RS-232

IBM 46XX

USB

CORD ATTACHMENT

Inserting Scanner

Removing Scanner

Need help?

Do you have a question about the Zebra DS9208 and is the answer not in the manual?

Zebra DS9208 Specifications

General

Decode Capability	1D, 2D, PDF417
Tilt Tolerance	± 65°
Skew Tolerance	± 60°
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 85% RH, non-condensing
Scan Pattern	Omnidirectional
Connectivity	USB, RS-232, Keyboard Wedge, IBM 46xx
Operating Temperature	32°F to 104°F (0°C to 40°C)
Scanner Type	Presentation
Scan Technology	Imager
Drop Spec	Withstands multiple 5 ft./1.5 m drops to concrete
Interface	USB, RS232, Keyboard Wedge, IBM 46xx over RS485
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Dimensions	5.51 in. H x 3.23 in. W x 3.15 in. D