To Next PageTo Next Page
Need help?Do you have a question about the Zebra DS2208 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Wavelength | 645 nm |
| Sensor type | LED |
| Scanner type | 1D/2D |
| Pitch reading angle | -65 - 65 ° |
| Motion tolerance (cm/s) | 13 |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, U.P.C. |
| Optical sensor resolution (W x H) | 640 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39 |
| Standard interfaces | USB, RS-232, RS-485, Keyboard wedge |
| Connectivity technology | Wired |
| Certification | EN 60950-1 2ed + A11 + A1 + A12 + A2:2013, IEC 60950-1 2ed + A1 + A2, UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07 IEC 62471 EN 55022 (Class B); EN 55032 (Class B) EN 55024 EN 61000-3-2 EN 61000-3-3 47 CFR Part 15, Subpart B, Class B ICES-003 Issue 6, Class B |
| Product color | Black |
| LED indicators | Yes |
| Housing material | - |
| International Protection (IP) code | IP42 |
| Sustainability certificates | RoHS |
| Cables included | Micro-USB |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Battery life | 100 h |
| Battery capacity | 2400 mAh |
| Power consumption | 250 mA |
| Power source type | DC |
| AC adapter output voltage | 5 V |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 99 mm |
|---|---|
| Width | 66 mm |
| Height | 165 mm |
| Weight | 161.6 g |
Specific warranty terms and conditions for customers in Australia.
Illustrates correct and incorrect aiming methods for effective barcode scanning.
Details on using the scanner in hand-held and presentation modes.
Bar code to reset scanner configuration to its original factory settings.
Bar codes for appending tab or enter keys to scanned data.
Bar code to manage the behavior of USB keyboard caps lock.
Default beeper sequences and LED indicator patterns for scanner status.
Overview of the PC-based software for scanner setup and management.
Solutions for when the scanner's aiming line is not visible or enabled.
Troubleshooting steps for decoding issues or failed data transmission.
Resolving issues where scanned data appears incorrectly on the host system.
Recommendations for maintaining good posture and avoiding physical strain while using the scanner.
Ergonomic guidelines and safety precautions for operating the scanner.
Specifications for the approved Zebra power supply unit for safe operation.
Compliance with US FCC Part 15 and Canadian ICES-3(B)/NMB-3(B) regulations.
CE marking and EU Declaration of Conformity for European markets.
Regulatory compliance information specific to Japan (VCCI) and Korea.
Details hazardous substance content in components per China RoHS requirements.
