Zebra DS9808 - Ergonomic Guidelines; Avoid Bending and Reaching

To Next Page

To Previous Page

DS6708 Poster

BLACK

PANTONE 285

http://www.zebra.com/ds9808

PerforationPerforation

DS9808

DS6708 Poster

DS9808

Caution

class 2 laser light

when open.

Do not stare

into beam.

Attentionlumiére

laser en cas d'ouverture.

Ne pas regarder dans

le faisceau.

Vorsicht

laserlicht klasse 2,

wenn abdeckung geöffnet.

Nicht in den strahl blicken.

LASER LIGHT- DO NOT STARE INTO BEAM .

CLASS 2 LASER PRODUCT. LASERLICHT - NICHT IN DEN

STRAHL BLICKEN. LASER KLASSE 2.

LUMIÈRE LASER - NE PAS REGARDER DANS LE FAISCEAU.

APPAREIL À LASER DE CLASSE 2 630-680nm, 1mW

PN:DS9808-XXXXXX MADE IN XXXXXX

XXXXXXXXXXXXXXX

(S)S/N: XXXXXXXXXXXX

SN BAR CODE

XXXX

MFD:XXXXXXX X

MODEL:DS9808

5V 850mA

5V 1.5A with optional module

012345

DS9808-LR

DS9808-SR

DS9808-LR

DS9808-SR

English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For

information on how to return product, please go to: http://www.zebra.com/weee

Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на

Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес:

http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra k

recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/recycling/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne

om returnering af produkter på: http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an

Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter

http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται

στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,

επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile.

Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:

http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo

de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite:

http://www.zebra.com/weee.

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra

pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :

http://www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere

restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il

seguente sito Web: http://www.zebra.com/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai

pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją

„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás

céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a

http://www.zebra.com/weee weboldalra.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand

Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:

http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden

teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden

van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w

celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej

http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem.

Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.

Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra

pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené

spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:

http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za

informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Suomi:

Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun

tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.

Svenska:

För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning.

Information om hur du returnerar produkten finns på http://www.zebra.com/weee.

Türkçe:

AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir.

Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.

OPTIMUM ARM POSITION

AVOID EXTREME WRIST ANGLES

Low/medium/high beep

Power up

Short medium beep

Bar code decoded

4 long low beeps

Transmission error

detected; data is

ignored

Standard Use

Hand-Held Scanning

High/low beep

Correct programming

sequence performed

Low/high beep

Incorrect

programming

sequence or

“Cancel” bar code

scanned

High/low/high/low beep

Successful

parameter

setting

Parameter Menu Scanning

BEEPER INDICATIONS LED INDICATIONS

Off

Scanner is on

and ready to scan,

or no power to

scanner

Green

Bar code is

successfully

decoded

Red

Transmission

error

Hands-Free (Presentation) Scanning

Off

No power to

scanner

Off Momentarily

Bar code is

successfully

decoded

Green

Scanner is ready

to scan

Red

Transmission Error

Local Contact:

OPTIMUM SCANNING

AVOID BENDING AND REACHING

REGULATORY INFORMATION

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow

the recommendations below. Consult with your local Health & Safety Manager to

ensure that you are adhering to your company's safety programs to prevent

employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

This guide applies to Model Number DS9808

All Zebra devices are designed to be compliant with rules and regulations in

locations they are sold and will be labeled as required.

Local language translations are available at the following website:

http://www.zebra.com/support.

Any changes or modifications to Zebra equipment, not expressly approved by

Zebra, could void the user’s authority to operate the equipment.

Laser Devices

The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their

intended purpose. The following statement is required to comply with US and

international regulations:

Caution: Use of controls, adjustments or performance of procedures other than

those specified herein may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright

light source, such as the sun, the user should avoid staring directly into the light

beam. Momentary exposure to a Class 2 laser is not known to be harmful.

Power Supply

Use ONLY a LISTED, Type no. 50-14000, or PWRS-14000, Direct Plug-In power

supply, marked Class 2 or LPS, or SELV, Rated 5 Vdc, 850 m A Min.

(IEC 60950-1). Use of alternative power supply will invalidate any approvals given

to this device and may be dangerous.

AVOID REACHING

AVOID BENDING

Recommended Usage Guide

AVOID EXTREME

WRIST ANGLES

72-109917-04 Revision A October 2016

Alternate left and right hands

taking breaks and task rotation

recommended

Alternate left and right hands

taking breaks and task rotation

recommended

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All

other trademarks are the property of their respective owners.

Zebra reserves the right to make changes to any product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or use of any

product, circuit, or application described herein. No license is granted, either expressly or by implication,

estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system,

apparatus, machine, material, method, or process in which Zebra products might be used. An implied license

exists only for equipment, circuits, and subsystems contained in Zebra products. Zebra and the Zebra head

graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark of Symbol

their respective owners. This Zebra Product may include Zebra Software, Commercial Third Party Software, and

Publicly Available software. Refer to Product Reference Guide for complete copyright, conditions and

disclaimer information.

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there

is a problem with the equipment, they will contact the Zebra Support at:

http://www.zebra.com/support.

For the latest version of this guide go to: http://www.zebra.com/support.

Radio Frequency Interference Requirements

Note: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

However there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

Waste Electrical and Electronic Equipment (WEEE)

Tested to comply

with FCC Standards

FOR HOME OR OFFICE USE

Marking and European Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this device is in compliance

with all the applicable Directives, 2014/30/EC, 2014/35/EC and

. 2011/65/EU. The full text of the EU Declaration of Conformity is

available at the following internet address: http://www.zebra.com/doc.

Japan (VCCI) - Voluntary Control Council for Interference

Class B ITE

この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラス

情

報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラ

ジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをして下さい。

This is a Class B product based on the standard of the Voluntary Control Council

for Interference from Information Technology Equipment (VCCI). If this is used

near a radio or television receiver in a domestic environment, it may cause radio

interference. Install and use the equipment according to the instruction manual.

Korea Warning Statement for Class B ITE

Class User’s Guide

B class As this equipment has obtained EMC registration for household

use, it can be used in any area including residential areas.

사용자 안내문

이 기기는 가정용으로 전자파 적합등록을 한 기기이오니 주거지역에

서는 물론 모든 지역에서 사용할 수 있습니다.

기 종 별

B급 기기

Hands-Free Scanning

Complies with 21CFR1040.10 & 1040.11 except for deviations pursuant

to Laser Notice NO. 50, dated June 24, 2007 and IEC/EN 60825-1:2007

and/or IEC/EN 60825-1:2014.

123SCAN

123Scan

is an easy-to-use, PC-based software tool that enables rapid and easy customized setup via a bar code or USB

cable. For more information, visit: http://www.zebra.com/123Scan2.

Aiming

Hand-Held Scanning

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

http://www.zebra.com

This table was created to comply with China RoHS requirements.

本表格依据SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在

GB/T 26572 规定的限量要求以下。

X: 表示该有害物质至少在该部件的某一均质材料中的含量

超出GB/T 26572 规定的限量要求。(企业可在此处，根

据实际情况对上表中打“×”的技术原因进行进一步说

明。）

(Parts) (Pb) (Hg) (Cd) (PBB) (PBDE)

(Metal Parts)

(Circuit Modules)

(Cables and Cable Assemblies)

(Plastic and Polymeric Parts)

(Optics and Optical Components)

(Batteries)

X O O O O O

O O O OX

O O O O

O O O O OO

O X O O OX

O O O O OO

O O

有害物质

(Cr (VI))

CMM Disclosure

•

Zebra DS9808 - Ergonomic Guidelines; Avoid Bending and Reaching

Related product manuals