LI3678 Quick Start Guide 17
LED Indications
Beeper Indications
Indication LED
Hand-Held Scanning
The scanner is on and ready to scan, or no power to the scanner Off
A bar code is successfully decoded Green
Transmission error Red
Hand-Free (Presentation) Scanning
No power to the scanner Off
The scanner is on and ready to scan Green
A bar code is successfully decoded Off momentarily
Transmission error Red
Indication Beeper Sequence
Power up Low/medium/high beep
A bar code is successfully decoded Medium beep
Transmission error detected; data is ignored 4 long low beeps
Successful parameter setting High/low/high/low beep
Correct programming sequence performed High/low beep
Incorrect programming sequence, or
Cancel
bar code scanned Low/high beep
Draft 1_Not for Distribution
To Next Page
Loading...