Need help?Do you have a question about the Zebra DS2278 and is the answer not in the manual?
General| Storage temperature (T-T) | -40 - 70 °C |
|---|---|
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Product color | White |
| LED indicators | Yes |
| Built-in display | No |
| Housing material | - |
| International Protection (IP) code | IP42 |
| Type | Handheld bar code reader |
| Wavelength | 645 nm |
| Sensor type | LED |
| Scanner type | 1D/2D |
| Tilt reading angle | -65 - 65 ° |
| Motion tolerance (cm/s) | 13 |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, Interleaved 2 of 5, Plessey, U.P.C. |
| Optical sensor resolution (W x H) | 640 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39 |
| Battery life | 84 h |
| Input voltage | 4.5 - 5.5 V |
| Battery capacity | 2400 mAh |
| Power source type | Battery, DC |
| Number of batteries supported | 1 |
| USB version | 2.0 |
| Bluetooth version | 4.0 |
| Standard interfaces | Bluetooth, USB |
| Connectivity technology | Wired & Wireless |
| Sustainability certificates | RoHS |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 90 mm |
|---|---|
| Width | 66 mm |
| Height | 175 mm |
| Weight | 214 g |
Details specific warranty provisions and consumer rights for customers in Australia.
Instructions for connecting the scanner's cradle cable to the host device.
Procedure to convert scanner enumeration for faster charging via Micro USB.
Guides for connecting the scanner via USB in Keyboard HID mode.
Guides for connecting the scanner via USB in IBM Hand-Held mode.
Guides for connecting the scanner via USB using OPOS for IBM Hand-Held.
Configuration for standard RS-232 serial connection.
Configuration for ICL RS-232 serial connection.
Configuration for Wincor-Nixdorf RS-232 serial connection, Mode A.
Configuration for IBM PC/AT and compatible keyboard wedge connections.
Configuration for IBM AT Notebook keyboard wedge connections.
Configuration for IBM 46XX emulation using Hand-Held Scanner (Port 9B).
Configuration for IBM 46XX emulation using Table-Top Scanner (Port 17).
Bar code to reset scanner settings to factory defaults.
Bar code to append a Tab key after scanned data.
Bar code to append an Enter key (Carriage Return/Line Feed).
Table detailing scanner beeper sequences for various events.
Table detailing scanner LED indicators for different statuses.
Solutions for when the digital scanner is not functioning.
Troubleshooting issues where the scanner decodes but does not transmit data.
Solutions for when the scanner fails to decode bar codes.
Troubleshooting incorrect display of scanned data on the host.
Guidelines for maintaining correct posture during scanner operation.
Specific advice to minimize ergonomic injury risks during use.
Information regarding Bluetooth technology approval and restrictions.
Details on regulatory approvals for wireless device usage in different countries.
Precautions for using wireless devices near medical equipment.
Recommendations for individuals with pacemakers using wireless devices.
General safety information related to RF exposure.
Information on international standards for human exposure to electromagnetic fields.
Information on EU RF exposure requirements for device operation.
Information on US and Canadian RF exposure compliance, including co-location.
Details on battery types, part numbers, and general battery characteristics.
Important safety precautions for handling, charging, and storing batteries.
Regulatory declarations for Brazil regarding unwanted emissions.
Compliance statement for Chile regarding electromagnetic radiation.
Information on downloading product manuals in local Chinese language.
To Next Page
