Zebra DS2278 User Manual

DS2278 Digital Scanner Quick Start Guide 5
Inserting Battery
Connecting the Micro USB Cable
Micro USB HID Conversion
When charging the scanner with a Micro USB cable instead of the presentation cradle, the scanner enumerates
over USB as a CDC device. If your host does not have a CDC driver, a delay occurs between connecting the
scanner to the host and the start of charging. To eliminate the delay scan HID Device Conversion below to
enumerate as an HID device. This allows the scanner to begin charging sooner.
HID Device Conversion
NOTE The Micro USB cable can be used for charging the digital scanner.
1
3
2

Zebra DS2278 Specifications

General

Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	White
LED indicators	Yes
Built-in display	No
Housing material	-
International Protection (IP) code	IP42
Type	Handheld bar code reader
Wavelength	645 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	-65 - 65 °
Motion tolerance (cm/s)	13
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, Interleaved 2 of 5, Plessey, U.P.C.
Optical sensor resolution (W x H)	640 x 480 pixels
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
Battery life	84 h
Input voltage	4.5 - 5.5 V
Battery capacity	2400 mAh
Power source type	Battery, DC
Number of batteries supported	1
USB version	2.0
Bluetooth version	4.0
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	90 mm
Width	66 mm
Height	175 mm
Weight	214 g