Zebra DS3678-ER

Zebra DS3678-ER scanner programming guide for Mobile Bale Scan
1. Reset the scanner to Factory Defaults
2. Set the Bluetooth PIN code to Variable
3. Enable Bluetooth HID

Zebra DS3678-ER Specifications

General

Brand	Zebra
Model	DS3678-ER
Category	Barcode Reader
Language	English

Summary

Mobile Bale Scan Configuration

Reset Scanner to Factory Defaults

Resets the scanner to its default factory settings, essential for a clean configuration.

Set Bluetooth PIN Code to Variable

Configures the Bluetooth Personal Identification Number (PIN) to be variable for pairing.

Enable Bluetooth HID Mode

Enables the Human Interface Device (HID) profile for Bluetooth connectivity.

Configure Scan Suffix for Field Advancement

Sets a '.' character as a suffix to ensure advancement to the next field after scanning.

Pairing Scanner via Bluetooth

Enables Bluetooth search on a mobile device and pairs it with the scanner.

Enter Pairing Key and Save

Scans numerical key sequences and a save barcode to complete device pairing.