Zebra DS9908 User Manual

Hands-Free Imaging Scanner
DS9908
Quick Start Guide
MN-003189-01EN Rev. A

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)

Summary

Legal and Usage Information

Copyright, Warranty, and EULA

Legal notices regarding copyright, trademarks, warranty, and end-user license agreement.

Terms of Use and Liability Disclaimer

Proprietary statement, product improvements, and disclaimers on liability.

Product Features

Scanner Component Identification

Overview and labeling of the DS9908 scanner's primary components.

Cable Management

Cable Insertion and Removal Procedures

Step-by-step instructions for connecting and disconnecting the scanner's interface cable.

Mounting the Scanner

Wall and Table Mounting Guides

Instructions and options for mounting the scanner on different surfaces.

Host Interface Connectivity

USB Interface Setup

Guide for connecting the scanner to a host system using a USB interface.

RS-232 Interface Setup

Instructions for connecting the scanner via an RS-232 serial interface.

IBM 46XX Interface Setup

Configuration details for connecting the scanner to IBM 46XX systems.

Keyboard Wedge Interface Setup

Steps for connecting the scanner using a keyboard wedge interface.

Scanner Configuration Options

Setting Scanner Defaults

How to restore the scanner to its factory default settings.

Adding Data Suffix Keys

Procedure to append Tab or Enter keys after scanned data.

Advanced Configuration and Scanning

USB Caps Lock Override

Configuration to control the behavior of USB Caps Lock when scanning.

Scanning Modes Overview

Explanation of hands-free (presentation) and handheld scanning modes.

Scanning Operation and Feedback

Aiming and User Status Indicators

Guidance on scanner aiming and interpreting feedback from beeps and LEDs.

Software and Troubleshooting

123Scan Utility Functions

Overview of the 123Scan software for scanner setup and management.

Troubleshooting Common Issues

Solutions for frequent problems encountered during scanner operation.

Recommended Usage Practices

Ergonomic Usage Guidelines

Advice on maintaining proper posture and avoiding strain for efficient scanner use.

Health, Safety, and Regulatory

Ergonomic Safety Recommendations

Detailed recommendations to minimize ergonomic injury risks during operation.

Product Approvals and Specifications

Information on device approvals, operating temperature, LED, and power supply requirements.

Regulatory Compliance Statements

Radio Frequency Interference

FCC and Canadian requirements for RF emissions and interference protection.

European and Asian Compliance

Compliance statements for EEA, Japan, and Korea, including interference and warning notices.

Regional Compliance: China

China RoHS Disclosure Table

Table detailing restricted substances in compliance with China RoHS requirements.

Regional Compliance: Taiwan, Eurasia, Turkey

Taiwan RoHS Disclosure Table

Table indicating restricted substances in compliance with Taiwan RoHS requirements.

Eurasian and Turkish Compliance Statements

Compliance statements for Eurasian Customs Union and Turkish WEEE regulations.

Environmental Compliance

WEEE Recycling Information (EU)

Instructions for EU customers on returning products for recycling at end-of-life.