Need help?Do you have a question about the Zebra DS6878 and is the answer not in the manual?
General| Wavelength | 655 nm |
|---|---|
| Scanner type | 2D |
| Yaw reading angle | -60 - 60 ° |
| Decoding standards | 1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro) |
| Tilt reading angle | -360 - 360 ° |
| Input voltage | 5 V |
| Bluetooth | Yes |
| Dimensions (WxDxH) | 69 x 97 x 185 mm |
| Certification | FCC, RoHS |
| Product color | Black |
| International Protection (IP) code | IP43 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Cables included | USB |
Weight and Dimensions| Weight | 238 g |
|---|
Prepare the DS6878 by setting factory defaults and scanning necessary barcodes for iOS pairing.
Navigate iPad settings to enable Bluetooth and select the DS6878 for connection.
Verify the scanner connection on the iPad and test keyboard input in an application.
Scan required barcodes on the DS6878 and activate Bluetooth on the Android device.
Search for, select, and pair the DS6878 with the Android device, including PIN code entry.
Confirm successful connection and test the scanner's keyboard input capability on the Android device.
Scan necessary barcodes and configure Bluetooth settings on the Windows 8 device for pairing.
Add the DS6878 as a Bluetooth device in Windows 8 settings and complete the pairing process.
Confirm the DS6878 is connected in Windows 8 and test its keyboard input functionality.
To Next Page
