Need help?Do you have a question about the Zebra MP7000 and is the answer not in the manual?
General| Type | Built-in bar code reader |
|---|---|
| Sensor type | CMOS |
| Scanner type | 1D/2D |
| Linear (1D) barcodes supported | Codabar, Code 128, Code 32, Code 39, Code 93, Discrete 2 of 5, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, Interleaved 2 of 5, JAN, MSI, Plessey, Trioptic, UPC-A, UPC-E |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, Han Xin, Micro QR Code, MicroPDF417, PDF417, QR Code |
| Input voltage | 90 - 264 V |
| Input frequency | 47 - 63 Hz |
| Power source type | AC, RS-232, USB |
| Power consumption (standby) | 3 W |
| Power consumption (typical) | 5.5 W |
| Standard interfaces | RS-232, RS-485, USB |
| Connectivity technology | Wired |
| Keys quantity | 4 keys |
| Product color | Black, Stainless steel |
| LED indicators | Yes |
| Image formats supported | BMP, JPEG |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 102 mm |
|---|---|
| Width | 292 mm |
| Height | 128 mm |
| Weight | 5700 g |
Explains the guide's purpose and scope.
Lists other relevant Zebra documentation and software.
Defines conventions used in the guide for clarity.
Details Zebra's on-site support services for rapid problem resolution.
Provides a general description of the MP7000 Scanner Scale and its capabilities.
Lists and describes the various available MP7000 Scanner Scale configurations.
Details the physical and functional features of the MP7000 Scanner Scale.
Describes supported interfaces and communication methods for the MP70XX.
Explains how to connect the MP70XX using the USB interface.
Details the RS-232 connection options and procedures for the MP70XX.
Provides pinout details for various connectors on the MP70XX.
Covers requirements for preparing the installation site for the MP70XX.
Outlines steps for preparing the checkstand for MP70XX installation.
Guides on installing the various components of the MP70XX system.
Provides a concise overview of the installation process steps.
Details the procedure for installing the MP7000 Scanner Scale unit.
Explains how to install Checkpoint EAS antennas for the MP70XX.
Step-by-step guide for calibrating the scale.
Instructions for entering calibration mode electronically.
Details the process for calibrating the scale without any weight.
Explains the procedure for calibrating the scale with a weight applied.
Describes how to interpret and finalize the calibration results.
Explains the function of LEDs, beepers, and buttons on the scanner.
Details the operation of the physical buttons on the scanner's front panel.
Outlines methods for programming the MP70XX device.
Describes how to perform scanning operations with the MP70XX.
Explains the EAS functionality and supported controllers for the MP70XX.
Introduces 123Scan as a tool for scanner setup and configuration.
Describes ADF for customizing scanned data before transmission.
Provides instructions for cleaning and maintaining the MP70XX.
Offers guidance on diagnosing and resolving issues with the MP70XX.
Lists and explains common error and warning codes displayed by the MP70XX.
Details scanner functionality supported by different communication protocols.
To Next Page
