Zebra MP7000 User Manual

Statistics F - 3
Communication Diagnostics
• USB Reset Count (#15267)-Number of USB Resets. [Occurrences]
• USB Suspend Count (#15269)-Number of USB Suspends. [Occurrences]
• USB Resume Count (#15271)-Number of USB Resumes. [Occurrences]
• USB Enumeration Count (#15273)-Number of USB Enumerations. [Occurrences]
• USB Enumeration Count (Attached/Auxiliary Scanners) (#15279)-Total number of USB Enumerations from
peripheral connected scanners. [Occurrences]
• Host protocol (#15275)-Indicates the state of the Host interface at time of poll. OK(0) or Fault(1) [List]
• Host protocol (#15277)-Number of times the Host interface was in a 'Fault' state. [Faults]
Illumination Diagnostics
• Illumination Fault Count (Any Source) (#15134)-Number of times a 'Fault' was detected on Illumination
Sources 1 through 6. Note: If a 'Fault' exists on two Illumination Sources simultaneously, it will only be
counted once. [Faults]
• Illumination Source 1 (Left Horizontal) State (#15136)-Indicates the state of Illumination Source. 0K(0) or
Fault: Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 1 (Left Horizontal) Fault Count (#15141)-Number of times a 'Fault' was detected on the
illumination Source. [Faults]
• Illumination Source 2 (Center Horizontal) – State (#15143)-Indicates the state of illumination Source. OK(0)
or Fault: Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 2 (Center Horizontal) - Fault Count (#15148)-Number of times a 'Fault was detected on
the illumination Source. [Faults]
• Illumination Source 3 (Right Horizontal) State (#15150)-Indicates the state of Illumination Source. 0K(0) or
Fault: Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 3 (Right Horizontal) Fault Count (#15155)-Number of times a 'Fault' was detected on the
illumination Source. [Faults]
Digimarc UPC #15787 N/A N/A N/A
Digimarc EAN/JAN #15798 N/A N/A N/A
Digimarc Other #15776 N/A N/A N/A
Other 1D #15540 #15545 #15543 #15544
Other 2D #15547 #15552 #15550 #15551
Other #15554 #15559 #15557 #15558
Table F-1 Decode Time and Count Statistic/Parameter Numbers (Continued)
Symbology
Decode
Count*
Decode Time
Avg*
Decode Time
Min*
Decode Time
Max*
* Excludes decode data from attached peripherals.

Zebra MP7000 Specifications

General

Type	Built-in bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, Discrete 2 of 5, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, Interleaved 2 of 5, JAN, MSI, Plessey, Trioptic, UPC-A, UPC-E
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Han Xin, Micro QR Code, MicroPDF417, PDF417, QR Code
Input voltage	90 - 264 V
Input frequency	47 - 63 Hz
Power source type	AC, RS-232, USB
Power consumption (standby)	3 W
Power consumption (typical)	5.5 W
Standard interfaces	RS-232, RS-485, USB
Connectivity technology	Wired
Keys quantity	4 keys
Product color	Black, Stainless steel
LED indicators	Yes
Image formats supported	BMP, JPEG
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	128 mm
Weight	5700 g