Need help?Do you have a question about the Zebra LI3608 and is the answer not in the manual?
General| Connectivity | Corded |
|---|---|
| Sealing | IP67 |
| Operating Temperature | -22°F to 122°F/-30°C to 50°C |
| Decode Capability | 1D |
| Power Source | Host power |
| Storage Temperature | -40°F to 158°F/-40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Drop Specification | Withstands 8 ft./2.4 m drops to concrete |
| Scan Engine | Linear Imager |
| Interface | USB, RS232, Keyboard Wedge |
| Dimensions | 7.3 in. H x 3 in. W x 5.2 in. D |
| Supported Barcodes | Code 39, Code 128, Code 93, Interleaved 2 of 5, Codabar, MSI |
Provides a brief description of the LI3608 scanner's capabilities.
Identifies key physical components of the scanner, such as the scan window and trigger.
Lists optional accessories like Intellistand and Forklift Holder.
Connects the scanner to a host system via USB interface.
Connects the scanner using the RS-232 serial interface.
Connects the scanner via a keyboard wedge interface.
Connects the scanner to IBM 46XX systems.
Scans a bar code to restore factory default settings.
Configures the scanner to add an Enter key after scanned data.
Configures the scanner to add a Tab key after scanned data.
Manages the USB Caps Lock key behavior for the scanner.
Explains hand-held and hands-free scanning methods.
Provides visual guidance on proper aiming for successful scanning.
Describes the meaning of different LED light indications on the scanner.
Explains the different beep sequences and their meanings.
Details compliance with regulatory standards and model information.
Guidelines to minimize the risk of ergonomic injury during use.
States compliance with Class 1 LED safety standards.
Specifies optical output, pulse duration, and wavelength for LEDs.
Explains FCC compliance and potential radio frequency interference.
Declares compliance with applicable EU directives.
To Next Page