Zebra LI3608 User Manual

12 LI3608 Quick Start Guide
LED Indications
Beeper Indications
Indication LED
Hand-Held Scanning
The scanner is on and ready to scan, or no power to the scanner Off
A bar code is successfully decoded Green
Transmission error Red
Hand-Free (Presentation) Scanning
No power to the scanner Off
The scanner is on and ready to scan Green
A bar code is successfully decoded Off momentarily
Transmission error Red
Indication Beeper Sequence
Power up Low/medium/high beep
A bar code is successfully decoded Medium beep
Transmission error detected; data is ignored 4 long low beeps
Successful parameter setting High/low/high/low beep
Correct programming sequence performed High/low beep
Incorrect programming sequence, or
Cancel bar code scanned Low/high beep

Zebra LI3608 Specifications

General

Connectivity	Corded
Sealing	IP67
Operating Temperature	-22°F to 122°F/-30°C to 50°C
Decode Capability	1D
Power Source	Host power
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Humidity	5% to 95% non-condensing
Drop Specification	Withstands 8 ft./2.4 m drops to concrete
Scan Engine	Linear Imager
Interface	USB, RS232, Keyboard Wedge
Dimensions	7.3 in. H x 3 in. W x 5.2 in. D
Supported Barcodes	Code 39, Code 128, Code 93, Interleaved 2 of 5, Codabar, MSI