1 - 6 MP7000 Scanner Scale Integrator Guide
Peripherals
The MP7000 Scanner Scale supports the peripheral devices listed below.
Supported Auxiliary Hand-held Scanner
The MP70XX provides auxiliary data ports (USB and RS-232) to which a hand-held scanner can be connected.
EAS Devices
• Sensormatic AMB-9010 controller
• Sensormatic AMB-9010-IPS controller
• Checkpoint controller
• Checkpoint with interlock controller.
See
Electronic Article Surveillance (EAS) on page 5-15 for detailed information.
Scale Devices
• OEM standard scale
• Single/dual head Scale Displays.
• Mettler-Toledo price computing scale for parts of Europe (available September 2017).
USB Flash Drives
• Typical USB flash drive with Type A connector. (See
USB Staging Flash Drive on page 5-10.)
Customer Side Scanner (CSS)
• The CSS (MX101) is an optional integrated device that supports 1D and 2D barcode scanning. The CSS unit
replaces the MP70XX tower cover, and can be installed on either side of the MP70XX.
Related Product Line Configurations
Check Solution Builder for additional information regarding all available accessories, and the latest available
configurations.
NOTE An auxiliary cordless scanner, such as the DS2208, DS4308, or DS8178, can be attached to the MP70XX. If a
standard cradle is used with any of these scanners, a separate cradle power supply is required.
IMPORTANT The MP70XX scanner does not configure an auxiliary scanner. Auxiliary scanners must be configured
separately, independently of the MP70XX scanner.
To Next Page
Loading...