Zebra MP7000 User Manual

F - 4 MP7000 Scanner Scale Integrator Guide
• Illumination Source 4 (Left Vertical) State (#15157)-Indicates the state of Illumination Source. 0K(0) or Fault:
Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 4 (Left Vertical) Fault Count (#15162)-Number of times a 'Fault' was detected on the
illumination Source. [Faults]
• Illumination Source 5 (Center Vertical) State (#15164)-Indicates the state of Illumination Source. 0K(0) or
Fault: Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 5 (Center Vertical) Fault Count (#15169)-Number of times a 'Fault' was detected on the
illumination Source. [Faults]
• Illumination Source 6 (Right Vertical) State (#15171)-Indicates the state of Illumination Source. 0K(0) or
Fault: Over-Current(1), Fault: Stuck-On(2), or Fault: Stuck-Off(3). [List]
• Illumination Source 6 (Right Vertical) Fault Count (#15176)-Number of times a 'Fault' was detected on the
illumination Source. [Faults]
• Illumination Left PCB – State (#15178)-Indicates the state of the Left-Side-Aux-PCB. OK(0) or Fault(1). [List]
• Illumination Left PCB - Fault Count (#15180)-Number of times a 'Fault' was detected on the
Left-Side-Aux-PCB. [Faults]
• Illumination Right PCB – State (#15182)-Indicates the state of the Right-Side-Aux-PCB. OK(0) or Fault(1).
[List]
• Illumination Right PCB - Fault Count (#15184)-Number of times a 'Fault' was detected on the
Right-Side-Aux-PCB. [Faults]
Sensor/Camera Diagnostics
• Decodes on All Sensors (#15186)-Number of decodes from any Window. [Scans]
• Decodes on Sensor 1(Vertical Window) (#15188)-Number of decodes from the Vertical Window. [Scans]
• Decodes on Sensor 2(Horizontal Window) (#15190)-Number of decodes from the Horizontal Window.
[Scans]
• Sensor (Any Source) – State (#15192)-Indicates the state of the Imager-Sensors. OK(0) or Fault(1). [List]
• Sensor (Any Source) - Fault Count (#15197)-Number of times a 'Fault' was detected on the Imager-Sensors.
[Faults]
• Sensor 1(Vertical Window) – State (#15199)-Indicates the state of the Vertical-Imager-Sensor. OK(0) or
Fault(1). [List]
• Sensor 1(Vertical Window) - Fault Count (#15204)-Number of times a 'Fault' was detected on the
Vertical-Imager-Sensors. [Faults]
• Sensor 2(Horizontal Window) – State (#15206)-Indicates the state of the Horizontal-Imager-Sensor. OK(0) or
Fault(1). [List]
• Sensor 2(Horizontal Window) - Fault Count (#15211)-Number of times a 'Fault' was detected on the
Horizontal-Imager-Sensors. [Faults]

Zebra MP7000 Specifications

General

Type	Built-in bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, Discrete 2 of 5, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, Interleaved 2 of 5, JAN, MSI, Plessey, Trioptic, UPC-A, UPC-E
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Han Xin, Micro QR Code, MicroPDF417, PDF417, QR Code
Input voltage	90 - 264 V
Input frequency	47 - 63 Hz
Power source type	AC, RS-232, USB
Power consumption (standby)	3 W
Power consumption (typical)	5.5 W
Standard interfaces	RS-232, RS-485, USB
Connectivity technology	Wired
Keys quantity	4 keys
Product color	Black, Stainless steel
LED indicators	Yes
Image formats supported	BMP, JPEG
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	128 mm
Weight	5700 g