Zebra MP7000 - Installing the Short or Medium Platter; Removing the Long Platter

Operating the Scanner 5 - 7
Installing the Short or Medium Platter
To install the short or medium platter grasp the top and edge of the platter and lower into place until secure.
Figure 5-9 Installing the Short or Medium Platter
Removing the Long Platter
To remove the long platter:
1. Grasp the edge of the platter and lift up slightly.
2. Holding the edge and top of the platter, pull out and lift off.
Figure 5-10 Removing the Long Platter
Edge of Platter
Top of Platter
Top of Platter
Edge of Platter