Zebra MP7000 User Manual

ii MP7000 Scanner Scale Integrator Guide
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev. A June 2017 Initial Release
-02 Rev. A July 2017 Updates/Adds:
- Feedback URL
- MP7012 configurations
- MX101 PRG to Related Documents
- Changed 90 second timeout to 30 second timeout (scale calibration)
- Updated locations of AUX 1 & 2 ports
- Changed height of units above platter
- Horizontal Checkpoint Antenna parts
- Vertical Checkpoint Antenna parts
-03 Rev. A August 2017 Updated Sensormatic information.
-04 Rev. A February 2018 Updated:
- Scale Pole Display Type parameters

Zebra MP7000 Specifications

General

Type	Built-in bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, Discrete 2 of 5, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, Interleaved 2 of 5, JAN, MSI, Plessey, Trioptic, UPC-A, UPC-E
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Han Xin, Micro QR Code, MicroPDF417, PDF417, QR Code
Input voltage	90 - 264 V
Input frequency	47 - 63 Hz
Power source type	AC, RS-232, USB
Power consumption (standby)	3 W
Power consumption (typical)	5.5 W
Standard interfaces	RS-232, RS-485, USB
Connectivity technology	Wired
Keys quantity	4 keys
Product color	Black, Stainless steel
LED indicators	Yes
Image formats supported	BMP, JPEG
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	128 mm
Weight	5700 g