Host Interfaces and Cable Pinouts 2 - 21
RS-232 Host Types
To select an RS-232 host interface, scan one of the following barcodes.
Options:
• *Standard RS-232 (default)
• ICL RS-232
• Wincor-Nixdorf RS-232 Mode A
• Wincor-Nixdorf RS-232 Mode B
• Olivetti ORS4500
• Omron
• OPOS/JPOS
• Fujitsu RS-232
• CUTE
• NCR Variant (both scanner only and scanner/scale versions)
• Datalogic Variant.
NOTES1. Scanning Standard RS-232 activates the RS-232 driver, but does not change port settings (e.g., parity,
data bits, handshaking). Selecting another RS-232 host type barcode changes these settings.
2. The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE,
scan Enable Parameter Barcode Scanning (located in the MP7000 Scanner Scale Barcode
Programming Guide) then change the host selection.
To Next Page
Loading...