Zebra MP7000 User Manual

2 - 16 MP7000 Scanner Scale Integrator Guide
RS-232 Parameters
NOTE This guide includes limited parameter barcodes. For ALL MP70XX programming barcodes, refer to the
MP7000 Scanner Scale Barcode Programming Guide (p/n MN-002912-xx).
Table 2-4 RS-232 Host Parameters
Parameter Page Number
RS-232 Host Type
Standard RS-232 (default) 2-22
ICL RS-232 2-23
Wincor-Nixdorf RS-232 Mode A 2-24
Wincor-Nixdorf RS-232 Mode B 2-25
Olivetti ORS4500 2-26
Omron 2-27
OPOS/JPOS 2-28
Fujitsu RS-232 2-29
CUTE 2-30
NCR Variant 2-31
Datalogic Variant 2-32
RS-232 Device Port Configuration
AUX 1 Sensormatic and AUX 2 RS-232 Scanner (default) 2-34
Third Party Scale
Disable Third Party Scale (default - Disable) 2-39
Third Party Scale LED Pin (default - Active High) 2-41
Third Party Scale Zero Pin (default - Active High) 2-43

Zebra MP7000 Specifications

General

Type	Built-in bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, Discrete 2 of 5, EAN 128, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, Interleaved 2 of 5, JAN, MSI, Plessey, Trioptic, UPC-A, UPC-E
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Han Xin, Micro QR Code, MicroPDF417, PDF417, QR Code
Input voltage	90 - 264 V
Input frequency	47 - 63 Hz
Power source type	AC, RS-232, USB
Power consumption (standby)	3 W
Power consumption (typical)	5.5 W
Standard interfaces	RS-232, RS-485, USB
Connectivity technology	Wired
Keys quantity	4 keys
Product color	Black, Stainless steel
LED indicators	Yes
Image formats supported	BMP, JPEG
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	128 mm
Weight	5700 g