Zebra MP7000 - Scale Configuration Parameters; Legal Scale Units

Scale Calibration (For Models With a Scale) 4 - 13
Scale Configuration Parameters
Legal Scale Units
Parameter # 995
Scan a weight unit below to set the legal weight units for the MP70XX. Scan Kilograms for metric units; scan
Pounds for the US units.
* Kilograms
(0)
NOTE Refer to the MP7000 Scanner Scale Barcode Programming Guide (p/n MN-002912-xx), for all programming
barcodes for the MP70XX/scale.
IMPORTANTThe scale must be in a calibration mode to change this parameter.