Host Interfaces and Cable Pinouts 2 - 15
4. Select the RS-232 scanner host type by scanning the appropriate barcode (see
RS-232 Host Types on page
2-21). If your host does not appear in the terminal specific tables, refer to the documentation for the host device
to set communication parameters to match the host. To modify any other parameter options, scan the
appropriate barcodes in the MP7000 Scanner Scale Barcode Programming Guide (p/n MN-002912-xx).
5. The protocol on this Dual Cable Scanner/Scale port is SASI.
6. Select the device port configuration by scanning the appropriate barcode (refer to the MP7000 Scanner Scale
Barcode Programming Guide for RS-232 device port configuration).
7. Cycle power on the MP70XX.
To Next Page
Loading...