Zebra LI4278 - Pairing LI4278 Scanner with iOS Devices; Initial Scanner Configuration for iOS

LI4278 LINEAR IMAGER
PAIRING THE LI4278 TO IOS
FOLLOW THESE
10 EASY STEPS:
1
Set LI4278 Factory Defaults
The following barcodes must be scanned
before attempting to pair the scanner to the
Apple device.
Note: This feature is only available with LI4278 firmware
PAABIS00-002-R00 or higher.
2
LI4278
IPAD
ZEBRA TECHNOLOGIES
3
INSTRUCTION GUIDE
PAIRING THE LI4278 TO A TABLET