Introduction
What’s in the Box?
8
980644-001 Rev. A LP 2824 Plus™ User Guide 4/1/09
Feed Button
• Tap the Feed button once to force the printer to feed one blank label.
• Press the Feed button to take the printer out of a “pause” condition. The printer is put into
“pause” by either a programming command or an error condition. See What the Status
Light is Telling You on page 68 in the Troubleshooting chapter.
• Use the Feed button for printer setup and status (see Feed Button Modes on page 77 in the
Troubleshooting chapter).
Status Light
Located on the top case next to the feed button, the status light functions as a printer
operational indicator (see Status Light Descriptions on page 68).
Feed Button
Status Light
Ring
To Next Page
Loading...
