Zebra LP 2824 Plus - Page 35

23
Getting Started
Connecting the Printer to the Computer
4/1/09 LP 2824 Plus™ User Guide 980644-001 Rev. A
Ethernet
The printer requires UTP RJ45 Ethernet cable rated CAT-5 or better.
For more information on configuring your printer to run on a compatible Ethernet based
network, see the ZebraNet® 10/100 Internal Print Server manual. The printer must be
configured to run on your LAN (local area network). The print server on board your printer
can be accessed through the printer’s web pages.
Ethernet Status/Activity Indicators
Ethernet Cable
(RJ45 Connector)
LED Status Description
Both OFF No Ethernet link detected
Green 100 Mbps link detected
Green with the Amber
flickering on and off
100 Mbps link and Ethernet activity detected
Amber 10 Mbps link detected
Amber with the Green
flickering on and off
10 Mbps link and Ethernet activity detected
Green LED Amber LED