EasyManua.ls Logo

Zebra P110i

Zebra P110i
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Zebra
®
P110i
Card Printer
User’s Manual
980515-001 Rev. A

Other manuals for Zebra P110i

Question and Answer IconNeed help?

Do you have a question about the Zebra P110i and is the answer not in the manual?

Zebra P110i Specifications

General IconGeneral
USB 1.1 ports quantity1
Weight (imperial)10 lbs
Dimensions (WxDxH)201 x 328 x 235 mm
Storage temperature (T-T)23 - 158 °F
Operating temperature (T-T)15 - 30 °C
Storage relative humidity (H-H)20 - 70 %
Operating relative humidity (H-H)20 - 65 %
Power requirements100 ~ 240 Volts AC, 50 ~ 60 Hz
CertificationFCC Class A CE UL CUL
Weight and Dimensions IconWeight and Dimensions
Weight4500 g

Summary

Foreword

Copyright Notice

Document proprietary information, copyright, and disclaimer about accuracy and changes.

Trademarks

Lists trademarks for Zebra and Microsoft products mentioned in the manual.

Product Disposal

Instructions for recycling and proper disposal of the product according to local standards.

Return Materials Authorization

Procedure for returning equipment for repair, including obtaining an RMA number.

Declarations of Conformity

European Compliance Notices

Specifies voltage requirements for Norway and earth grounding, and FCC/IC compliance.

Getting Started

Unpacking Your Card Printer

Instructions on how to unpack the P110i printer from its packaging safely.

Controls and Indicators Overview

Overview of the printer's controls and status indicators, including the LCD panel.

Printer Ports and Switches

Identifies the location of the power switch, power socket, and USB port on the printer.

Multi-Function LCD Panel Messages

Lists and explains the various messages displayed on the printer's LCD panel.

Printer Installation

Physical Setup and Connection

Steps for placing the printer, connecting power/USB, and initial safety precautions.

Printer Driver Installation

Guide to installing the P110i printer driver using the provided CD for Windows 2000/XP.

Print Driver Installation Steps

Detailed steps to install the P110i printer driver from the CD, including language selection.

Printer Driver Configuration Options

How to access and modify printer driver settings like orientation, color, and head settings.

P110 i Printer Setup

Printer Features Overview

Identifies key physical components of the P110i Printer, such as the print head and card feeder.

Loading Ribbon Cartridge

Introduction to approved ribbon cartridges for the P110i printer.

Ribbon Cartridge Loading Procedure

Detailed steps for inserting the ribbon cartridge and ensuring proper alignment and closure.

Loading Cards into Feeder

Instructions for loading cards into the card feeder, including preparation and guidance.

Card Output Hopper Operation

How to operate the card output hopper, including its functional and closed positions.

Printing a Test Card

Procedure to print a test card to verify printer operation after loading ribbon and cards.

P110 i Printer Operation

Printing Requirements and Software

Overview of requirements for printing with the P110i, including drivers and software.

Creating a Sample Card Design

Steps to design and prepare a sample card for printing in Microsoft Word.

Printing the Sample Card

Instructions on how to print the prepared sample card using the printer driver settings.

Cleaning

Printer Cleaning System Overview

Overview of the printer's cleaning system using pre-saturated cleaning cards.

When and How to Clean

Criteria for cleaning and steps to initiate the printer's automatic cleaning cycle.

Manual Print Head Cleaning

Procedure for manually cleaning the print head using swabs to address stubborn deposits.

Troubleshooting

Troubleshooting Procedures Overview

Offers solutions to common problems encountered with the P110i printer.

Print Quality Issues Diagnosis

Diagnoses and fixes for print quality problems, focusing on cleanliness and card stock.

Troubleshooting: Spots and Lines on Cards

Addresses spots and non-printing lines on cards and their causes/solutions.

Troubleshooting: Pale Prints and No Output

Fixes for pale prints, inconsistent results, and scenarios with no printing.

Technical Specifications

General and Printing Specifications

Lists general features, color printing capabilities, speed, and resolution.

Bar Code and Card Specifications

Details supported bar codes, card types, dimensions, thickness, and capacities.

Ribbon, Interface, and Dimension Specs

Information on ribbon cartridges, interface type, and physical dimensions/weight.

Electrical, Environmental, and Options

Covers electrical requirements, environment, certifications, and available options.

Card Dimensions Details

Illustrates ISO standard dimensions for plain and magnetic stripe cards.

Appendix A Magnetic Card Encoder

Magnetic Card Encoder Overview

Information on the additional operations of P110i printers with a magnetic card stripe encoder.

Media Loading and Encoder Cleaning

Guidelines for loading magnetic stripe cards and cleaning the magnetic encoder.

ISO Standard Magnetic Stripe Encoding

Details ISO standard encoding specs for magnetic stripe tracks, densities, and characters.

Appendix B Card Sense Single Card Feed Mode

Single Card Feed Mode Setup

Explains the requirement for the Card Sense™ kit and initial installation step.

Installing Card Feed Kit Components

Steps to install the roller and prepare the card cleaning cartridge.

Configuring Driver for Single Feed

Guide to configuring printer properties and enabling Single Feed Support in the driver.

Printing a Single Card

Procedure for powering on the printer and inserting a single card into the front slot.

Appendix C Worldwide Sales & Support

Sales & Support Locations: Americas and Europe

Contact information and addresses for Zebra's sales and support in the Americas and Europe.

Sales & Support Locations: Asia Pacific and Website

Contact information for Asia Pacific and the official website address for Zebra card printers.

Related product manuals