Need help?Do you have a question about the Zebra P110 and is the answer not in the manual?
Printing| print_resolution | 300 dpi (11.8 dots/mm) |
|---|---|
| print_speed | 30 seconds per card full-color (P110i) single-sided |
Card Specifications| card_width | 2.12"/54 mm |
|---|---|
| card_length | 3.38"/86 mm |
| card_thickness | 20 mil (.508 mm) to 40 mil (1.02 mm) |
| card_feeder_capacity | 100 cards (30 mil) |
| card_output_hopper_capacity | 45 cards (30 mil) |
Power| voltage | 100 ~ 240 Volts AC |
|---|---|
| frequency | 50 ~ 60 Hz |
| image_memory | 8MB |
Operating Environment| operating_temperature | 60° F/ 15° C to 86° F/ 30° C |
|---|---|
| operating_humidity | 20% to 65% non-condensing |
| storage_temperature | 23° F/-5° C to 158° F/ 70° C |
| storage_relative_humidity | 20% to 70% non-condensing |
Weight and Dimensions| width | 7.9"/201 mm |
|---|---|
| depth | 12.9"/328 mm |
| height | 9.25"/235 mm |
| weight | 9.5 lbs/4.3 kg |
Legal notice regarding the document's content and usage rights.
Lists proprietary trademarks of Zebra and other companies.
Information on environmentally responsible disposal of the product.
Procedure for returning equipment for repair or warranty.
Compliance statements for regulatory standards like FCC.
Compliance statement for Industry Canada standards.
Explains the meaning of various icons used in the manual.
Explains the numbering and lettering system for Zebra card printers.
Instructions for safely removing the printer from its packaging.
Overview of the printer's buttons, LCD panel, and status indicators.
Identifies ports and controls located on the back of the printer.
Details the rear panel configuration for printers with an Ethernet interface.
Step-by-step guide for physically setting up the card printer.
Instructions for installing the necessary software driver for the printer.
Detailed steps for the printer driver installation process.
How to modify and configure printer driver settings and preferences.
Illustrates and labels the internal components of the printer.
Guide on how to correctly install a ribbon cartridge into the printer.
Instructions for loading blank cards into the printer's card feeder.
Details on the card output hopper's positioning and function.
Steps to print a test card to verify printer functionality.
General information on the requirements for printing with the card printer.
Guide to designing and preparing a sample card for printing.
Procedure for printing a test or sample card using the driver.
Overview of the printer's built-in cleaning capabilities and when to use them.
Instructions for manual cleaning of the printer's delicate print head.
Table of common problems and their solutions for printer operation.
Guidance on diagnosing and resolving problems related to print quality.
Steps for resolving issues with the printer's network connectivity.
Explanation of the LED indicators for the Ethernet adapter's status.
Interpretation of the LED indicators for network speed and activity.
Key general features of the card printer.
Specifications related to color printing capabilities.
Supported barcode symbologies and printing capabilities.
Specifications for card types, dimensions, and feeder capacity.
Details on compatible ribbon cartridges and their capacities.
Supported connection interfaces like USB and Ethernet.
Physical size and weight specifications of the printer.
Power requirements and electrical specifications.
Operating and storage conditions for the printer.
Available optional features and kits for the printer.
Standard dimensions for plain and magnetic stripe cards.
Introduction to the magnetic card encoder functionality.
Correct way to orient cards with magnetic stripes for encoding.
Procedure for cleaning the magnetic encoder components.
Details on ISO standard encoding tracks and character sets.
How to print cards individually without using the automatic feeder.
Steps to install the optional single card feed kit.
Instructions for installing the cleaning cartridge for the single feed mode.
Configuring the printer driver for single card feed mode.
Process for printing a single card using the configured mode.
How to share the printer over a network via a host computer.
Connecting the printer using a separate external print server device.
Connecting the printer using its integrated network print server.
Contact information and locations for sales and technical support.
Sales and support contact details for the Asia Pacific region.
Sales and support contact details for Latin America.
The official website address for Zebra card solutions.
To Next Page
