Need help?Do you have a question about the Zebra P120i and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Card Capacity | 100 cards (input hopper) |
| Card Feeder | Automatic |
| Connectivity | USB |
| Media Handling | Single-sided or dual-sided printing |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Print Method | Dye sublimation / resin thermal transfer |
| Print Technology | Dye Sublimation |
| Output Hopper | 100 cards |
| Interface | USB |
| Card Thickness | 0.012 to 0.042 inches (0.3 to 1.06 mm) |
| Card Size | CR-80 (3.375 x 2.125 inches / 85.6 x 54 mm) |
| Maximum Print Width | 2.13 in (54 mm) |
| Maximum Print Length | 3.38" (86 mm) |
| Media Width | 2.12" (54 mm) |
| Media Thickness | 0.012 to 0.042 inches (0.3 to 1.06 mm) |
| Memory | 16 MB |
| Operating Temperature | 50 to 95°F (10 to 35°C) |
To Next Page
