14 P120i Card Printer User Guide 980504-001 Rev. A
Printer Installation
Installing the P120i Printer
Encoder Settings
1. In the Encode Only window, choose Yes or No. If you choose Yes , the printer will be set
up to ONLY encode magnetic stripes on cards. No printing of cards will occur. Click the
Next> button. The Select Encoder Coercivity window will open.
2. In the Select Encoder Coercivity window, choose coercivity settings that match the type
of cards being encoded, then click the Next> button. The Track 1 Settings window will
open.
To Next Page
Loading...
