Zebra P110 User Manual

iv P110i & P110m Card Printer User’s Manual 980515-001 Rev. C
Foreword
Product Disposal
Return Materials Authorization
Before returning any equipment to Zebra Technologies Corporation for in-warranty or out-of-
warranty repair, contact Repair Administration for a Return Materials Authorization (RMA)
number. Repack the equipment in the original packing material and mark the RMA number
clearly on the outside. Ship the equipment, freight prepaid, to the address listed below:
Declarations of Conformity
FCC Regulations
Models P110i and P110m have been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and operated in accordance with the P110i and P110m User’s
Manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not
expressly approved by Zebra may cause harmful interference and void the FCC authorization
to operate this equipment.
Product Disposal Information • Do not dispose of this product in unsorted municipal
waste. This product is recyclable, and should be recycled according to your local
standards. For more information, please see our web site at:
http://www.zebra.com/environment
For USA, Latin America, and Asia / Pacific:
Zebra Technologies Corporation
Zebra Card Printer Solutions
1001 Flynn Road
Camarillo, CA. 93012-8706.USA
Phone: +1 (805) 578-5001
FAX: +1 (805) 579-1808
For Europe and Middle East:
Zebra Technologies Corporation
Zebra Card Printer Solutions
Pittman Way, Fulwood
Preston, PR2 9ZD
Lancashire, U.K.
Phone: +44 - 1 - 772 - 797555
FAX: +44 - 1 - 772 - 693000

Zebra P110 Specifications

Printing

print_resolution	300 dpi (11.8 dots/mm)
print_speed	30 seconds per card full-color (P110i) single-sided

Card Specifications

card_width	2.12"/54 mm
card_length	3.38"/86 mm
card_thickness	20 mil (.508 mm) to 40 mil (1.02 mm)
card_feeder_capacity	100 cards (30 mil)
card_output_hopper_capacity	45 cards (30 mil)

Power

voltage	100 ~ 240 Volts AC
frequency	50 ~ 60 Hz
image_memory	8MB

Operating Environment

operating_temperature	60° F/ 15° C to 86° F/ 30° C
operating_humidity	20% to 65% non-condensing
storage_temperature	23° F/-5° C to 158° F/ 70° C
storage_relative_humidity	20% to 70% non-condensing

Weight and Dimensions

width	7.9"/201 mm
depth	12.9"/328 mm
height	9.25"/235 mm
weight	9.5 lbs/4.3 kg