980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 35
ADVANCED SETTINGS DIALOGUE BOX
Track: Select the track you want to configure.
Track Settings: Select the mode and density for the tracks.
Start/Stop Character (For Non-ISO encoding only): Enter an ASCII value for the Start
and Stop characters.
Encoding Start Position (For Non-ISO encoding only): Enter the encoding start position
in millimeters (mm).
Character Parity (For Non-ISO encoding only): Choose the Character Parity you want to
work with, even, odd, or no parity.
LRC Parity (For Non-ISO encoding only): Choose the LRC Parity you want to work
with, even, odd, or no parity.
Click the Restore Defaults button to reset the settings to the original values.
To Next Page
Loading...
