Zebra P4T - Introduction to the P4 T Series; Unpacking and Inspection

4
Introduction
Getting Started
Using the
Printer
Troubleshooting
Contact Us
P4T/RP4T Quick Start Guide
Install the Battery Pack
Section Continues
Always use Zebra approved battery packs and media for maximum performance
and superior printing results. P4T Series printers will not operate with non-Zebra
batteries.
Battery Pack
Insert a fully charged battery pack
into the bottom of the printer as
shown.
Press battery pack until it clicks
into place
Remove the battery pack by
pressing on the latch and
rotating the battery pack out
of the bottom of the printer.