Zebra RW 420 Installation Instructions

pg. 4 P1010425 Rev. G
Notification of Canadian Requirements
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé å la norme NMB-003 du Canada.
Product Safety Regulatory Marking
Regulatory labels indicate compliance with safety standards. This product carries one or
more of the following labels: UL, CE, TUV and/or CS.
Introduction
NOTE: Zebra Technologies Corporation is not liable for personal injury or damage to any equipment
caused by the improper installation of this equipment to any power source.
The RW 420 Mobile Battery Eliminator Kits consist of the following:
• The DC to DC Vehicle Plug (Zebra p/n P1003766-001) for the cigarette lighter plug version
OR the DC to DC Open Terminal (p/n P1003766-002) for direct wiring to the vehicle
electrical system version
• The DC Transfer Pack Assembly (Zebra p/n P1000721)
NOTE: When ordering the Mobile Battery Eliminator Kit, specify either the cigarette lighter version
or the direct wiring version to go along with the DC Transfer Pack Assembly, not both.
Caution: All of these systems must be connected in strict accordance with the instructions in this
document. Failure to install this equipment per these instructions will void the warranty.
RW 420 Mobile Battery Eliminator Kits

Zebra RW 420 Specifications

General

Type	Battery
Product color	Blue
Battery voltage	- V
Battery capacity	- mAh
Number of battery cells	4

Weight and Dimensions

Weight	- g