Zebra Stripe - Page 5

Control Panel Circuit Board Replacement ..........5-31
Main Logic Board Removal .................5-32
Main Logic Board Installation ................5-32
EPROM Software Installation ................5-33
Main Drive Belt Removal, Replacement, and
Adjustment for Printers Without the Peel-Off Option. . . 5-35
Main Drive Belt Removal, Replacement, and Adjustment
for Printers Equipped With the Peel-Off Option .....5-36
Platen Replacement ......................5-37
Ribbon Take-Up Motor Replacement.............5-38
Stepper Motor Replacement .................5-38
Motor Balance Procedure ...................5-39
Power Supply Removal ....................5-40
Power Supply Replacement..................5-40
AC Power Fuse Replacement.................5-41
Battery Replacement .....................5-42
6 Troubleshooting
Troubleshooting Tables ....................6-1
Sample Labels for Troubleshooting ..............6-5
Factory Assistance ......................6-10
7 Drawings and Parts Lists
Mechanical Parts and Assemblies ...............7-1
8 Appendix
AC Power Cable Selection ...................8-1
ASCII Code Chart .......................8-2
Setting Print Darkness .....................8-3
Table of Contents Stripe Maintenance Manual:
Volume 1
iv 44868L