65
Maintenance
Cleaning
3/31/09 TLP 2824 Plus™ User Guide 980643-001 Rev. A
Sensor Cleaning
Dust can accumulate on the media sensors.
1. Gently brush away dust; if necessary, use a dry swab to brush away dust. If adhesives or
other contaminates remain, use an alcohol moistened swab to break it up.
2. Use a dry swab to remove any residue that may be left from the first cleaning.
3. Repeat steps 1 and 2 as required until all residue and streaks are removed from the sensor.
.
Black-Line
Sensor
Label Taken
Sensor
Gap
Sensor
To Next Page
Loading...
