71
Maintenance
Replacing the Printhead
3/31/09 TLP 2824 Plus™ User Guide 980643-001 Rev. A
11. Clean the printhead. Use a new pen to wipe body oils (finger prints) and debris off the
printhead. Clean from the center of the printhead to the outside. See Cleaning the
Printhead on page 63.
12. Reload media and ribbon. Plug in the power cord, turn on the printer and print a status
report to ensure proper function. See Printing a Test (Printer Configuration) Label
on page 23.
Take-up Hub
(spring not shown)
Wire Cover
To Next Page
Loading...
