Zebra Z4Mplus Maintenance Manual

2 Z4Mplus and Z6Mplus Maintenance Manual 13358L Rev. 1 11/17/03
Section 1 System Description
Printer Specifications
A general description of the printer and the options available follows.
Options
Zebra Programming Language II (ZPL II)
•Cutter •Peel
• Cutter tray • Peel Liner Take-up
(Only available on Z4Mplus with
Peel)
• Memory cards • Value Peel Rewind
• Bar-One
®
Windows™-based
WYSIWYG on-screen label
design and print application
software
• ZebraNet PrintServer II,
including internal Ethernet
interface
(10Base-T), WebView graphical
setup and printer control, and
Alert unsolicited error
notification
• RS-485 interface • Font cards
• Printer drivers for Windows
operating systems
• Downloadable Fonts
• Downloadable graphics, scalable
and bitmap fonts, and label
formats
• Controlled via mainframe, mini-
computer, PC, portable data
terminal
• Object copying between memory
areas (RAM, memory card, and
internal FLASH)
• Programmable quantity with
print, pause, and cut control
• Serialized fields
• Code Page 850 character set • Error-checking protocol
• Adjustable print cache • User-programmable password
• Data compression • Slew command
• Automatic virtual input buffer
management
• Communicates in printable ASCII
characters
• Automatic memory allocation • In-spec OCR-A and OCR-B
• Format inversion • UPC/EAN
• Mirror image printing • Status message to host upon
request
• Four-position field rotation (0º,
90º, 180º, and 270º)

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing